Problems with new install, mailx (Full Version)

All Forums >> [SFU / Interix / SUA Technology] >> SFU / Interix - Getting Started



Message

strtcar -> Problems with new install, mailx (Sep. 26, '06, 2:40:13 PM)

I have SFU 3.5 utilities only installed on my windowxp pro laptop. I got cron working by changing EnableSetuidBinaries to 1.
My problem now is i want to send emails to an internet address but doing so doesnt work. I dont see any errors just never get the email.
I am able to send emails to local accounts.

$ whoami
Administrator
$ mailx administrator
test
.
EOT
$ mail
"/var/mail/WORK+Administrator": 1 message 1 new
>N 1 WORK+Administrato Tue Sep 26 13:34 12/356
& 1
From WORK+Administrator Tue Sep 26 13:34:35 2006
Date: Tue, 26 Sep 2006 13:34:35 -0500
From: WORK+Administrator
To: administrator

test

&



Rodney -> RE: Problems with new install, mailx (Sep. 27, '06, 4:40:13 AM)

Check that the /etc/resolv.conf file has a nameserver entry with a valid DNS IP.



strtcar -> RE: Problems with new install, mailx (Sep. 27, '06, 10:41:52 AM)

Yea i checked /etc/resolv.conf and it has the valid DNS entry for nameserver. But still no email to the outside world. What else can I check?



strtcar -> RE: Problems with new install, mailx (Sep. 27, '06, 10:46:36 AM)

Here is the error I see when I send an email to outside:

From MAILER-DAEMON Wed Sep 27 09:41:56 2006
Date: Wed, 27 Sep 2006 09:41:55 -0500
From: Mail Delivery Subsystem <MAILER-DAEMON>
To: ENTERO-DEV+Administrator
MIME-Version: 1.0
Content-Type: multipart/report; report-type=delivery-status;
boundary="k8REftPF000775.1159368115/ENTERO-DEV.auxsable.com"
Subject: Returned mail: see transcript for details
Auto-Submitted: auto-generated (failure)

This is a MIME-encapsulated message

--k8REftPF000775.1159368115/ENTERO-DEV.auxsable.com

The original message was received at Wed, 27 Sep 2006 09:41:55 -0500
from ENTERO-DEV+Administrator@localhost

----- The following addresses had permanent fatal errors -----

(reason: 550 Invalid recipient/sender mailing address)

----- Transcript of session follows -----
... while talking to mx1.hotmail.com.:
>>> RCPT To:<strtcar@hotmail.com>
<<< 550 Invalid recipient/sender mailing address
550 5.1.1 ... User unknown

--k8REftPF000775.1159368115/ENTERO-DEV.auxsable.com
Content-Type: message/delivery-status

Reporting-MTA: dns; ENTERO-DEV.auxsable.com
Arrival-Date: Wed, 27 Sep 2006 09:41:55 -0500

Final-Recipient: RFC822;
Action: failed
Status: 5.1.1
Remote-MTA: DNS; mx1.hotmail.com
Diagnostic-Code: SMTP; 550 Invalid recipient/sender mailing address
Last-Attempt-Date: Wed, 27 Sep 2006 09:41:55 -0500

--k8REftPF000775.1159368115/ENTERO-DEV.auxsable.com
Content-Type: message/rfc822

Return-Path: <ENTERO-DEV+Administrator>
Received: (from ENTERO-DEV+Administrator@localhost)
by ENTERO-DEV.auxsable.com (8.12.8p1/8.12.8) id k8REftPG000839
for ; Wed, 27 Sep 2006 09:41:55 -0500
Date: Wed, 27 Sep 2006 09:41:55 -0500
From: ENTERO-DEV+Administrator
Message-Id: <200609271441.k8REftPG000839@ENTERO-DEV.auxsable.com>
To:
Subject: test2



eperea -> RE: Problems with new install, mailx (Sep. 27, '06, 11:01:32 AM)

That looks like a hotmail error, assuming is a valid address. Have you tried mailing to a different (and more normal) service?

(By "more normal" I mean a server that will give a proper error message. Does "550 Invalid recipient/sender mailing address" refer to the sender or recipient address, or does it object to using the same address for both? In any case, it appears that your system is communicating properly with hotmail's server.)



strtcar -> RE: Problems with new install, mailx (Sep. 27, '06, 11:33:45 AM)

Same error when i use my sbc email

mail -s "test3"
.


From MAILER-DAEMON Wed Sep 27 10:30:17 2006
Date: Wed, 27 Sep 2006 10:30:17 -0500
From: Mail Delivery Subsystem <MAILER-DAEMON>
To: ENTERO-DEV+Administrator
MIME-Version: 1.0
Content-Type: multipart/report; report-type=delivery-status;
boundary="k8RFUHue000777.1159371017/ENTERO-DEV.auxsable.com"
Subject: Returned mail: see transcript for details
Auto-Submitted: auto-generated (failure)

This is a MIME-encapsulated message

--k8RFUHue000777.1159371017/ENTERO-DEV.auxsable.com

The original message was received at Wed, 27 Sep 2006 10:30:17 -0500
from ENTERO-DEV+Administrator@localhost

----- The following addresses had permanent fatal errors -----

(reason: 550 Invalid recipient/sender mailing address)

----- Transcript of session follows -----
... while talking to sbcmx4.prodigy.net.:
>>> RCPT To:<roth_richard@sbcglobal.net>
<<< 550 Invalid recipient/sender mailing address
550 5.1.1 ... User unknown

--k8RFUHue000777.1159371017/ENTERO-DEV.auxsable.com
Content-Type: message/delivery-status

Reporting-MTA: dns; ENTERO-DEV.auxsable.com
Arrival-Date: Wed, 27 Sep 2006 10:30:17 -0500

Final-Recipient: RFC822;
Action: failed
Status: 5.1.1
Remote-MTA: DNS; sbcmx4.prodigy.net
Diagnostic-Code: SMTP; 550 Invalid recipient/sender mailing address
Last-Attempt-Date: Wed, 27 Sep 2006 10:30:17 -0500

--k8RFUHue000777.1159371017/ENTERO-DEV.auxsable.com
Content-Type: message/rfc822

Return-Path: <ENTERO-DEV+Administrator>
Received: (from ENTERO-DEV+Administrator@localhost)
by ENTERO-DEV.auxsable.com (8.12.8p1/8.12.8) id k8RFUHuf000841
for ; Wed, 27 Sep 2006 10:30:17 -0500
Date: Wed, 27 Sep 2006 10:30:17 -0500
From: ENTERO-DEV+Administrator
Message-Id: <200609271530.k8RFUHuf000841@ENTERO-DEV.auxsable.com>
To:
Subject: test3


--k8RFUHue000777.1159371017/ENTERO-DEV.auxsable.com--



strtcar -> RE: Problems with new install, mailx (Sep. 27, '06, 11:43:33 AM)

Thanks for your reply here is something else:
I have SFU 3.5 setup on a client server.
If I email to the outside world I get that error everytime.
However if I put an email address for local domain, ie somebody that works at client site, they are able to get the test email.

mail -s "test"
.



eperea -> RE: Problems with new install, mailx (Sep. 27, '06, 12:06:10 PM)

I think the problem may be due to both SBC and Hotmail looking for you to login before sending mail. If you don't mind, would you send me a test message to ? I'm curious if the problem is due to a STMP AUTH requirement in the servers you are trying...



strtcar -> RE: Problems with new install, mailx (Sep. 27, '06, 12:17:41 PM)

this is what I get why I try to email you.

From MAILER-DAEMON Wed Sep 27 11:14:14 2006
Date: Wed, 27 Sep 2006 11:14:14 -0500
From: Mail Delivery Subsystem <MAILER-DAEMON>
To: ENTERO-DEV+Administrator
MIME-Version: 1.0
Content-Type: multipart/report; report-type=delivery-status;
boundary="k8RGEE9h001871.1159373654/ENTERO-DEV.auxsable.com"
Subject: Returned mail: see transcript for details
Auto-Submitted: auto-generated (failure)

This is a MIME-encapsulated message

--k8RGEE9h001871.1159373654/ENTERO-DEV.auxsable.com

The original message was received at Wed, 27 Sep 2006 11:14:13 -0500
from ENTERO-DEV+Administrator@localhost

----- The following addresses had permanent fatal errors -----

(reason: 550 Invalid recipient/sender mailing address)

----- Transcript of session follows -----
... while talking to hermes.walkereng.com.:
>>> RCPT To:<eperea@walkereng.com>
<<< 550 Invalid recipient/sender mailing address
550 5.1.1 ... User unknown

--k8RGEE9h001871.1159373654/ENTERO-DEV.auxsable.com
Content-Type: message/delivery-status

Reporting-MTA: dns; ENTERO-DEV.auxsable.com
Arrival-Date: Wed, 27 Sep 2006 11:14:13 -0500

Final-Recipient: RFC822;
Action: failed
Status: 5.1.1
Remote-MTA: DNS; hermes.walkereng.com
Diagnostic-Code: SMTP; 550 Invalid recipient/sender mailing address
Last-Attempt-Date: Wed, 27 Sep 2006 11:14:14 -0500

--k8RGEE9h001871.1159373654/ENTERO-DEV.auxsable.com
Content-Type: message/rfc822

Return-Path: <ENTERO-DEV+Administrator>
Received: (from ENTERO-DEV+Administrator@localhost)
by ENTERO-DEV.auxsable.com (8.12.8p1/8.12.8) id k8RGED9i001807
for ; Wed, 27 Sep 2006 11:14:13 -0500
Date: Wed, 27 Sep 2006 11:14:13 -0500
From: ENTERO-DEV+Administrator
Message-Id: <200609271614.k8RGED9i001807@ENTERO-DEV.auxsable.com>
To:
Subject: another test from strtcar

test

--k8RGEE9h001871.1159373654/ENTERO-DEV.auxsable.com--



strtcar -> RE: Problems with new install, mailx (Sep. 27, '06, 12:27:32 PM)

Is there a way to point to a specific external smtp server?



eperea -> RE: Problems with new install, mailx (Sep. 27, '06, 12:41:04 PM)

I think you need to check with your ISP or network admin. That error message did not come from hermes.walkereng.com. Its equivalent would be:

"550 sorry, no mailbox here by that name. (#5.1.1)"

(I went through qmail-smtpd.c and that was the only 550 error listed.)

Looks like somebody is re-routing smtp traffic through his server, which presumably requires a login.



strtcar -> RE: Problems with new install, mailx (Sep. 27, '06, 12:45:32 PM)

Will do I will check with network guys.

However, If i am able to point to an external smtp server that doesnt require login would this then work? And if so what do I need to change in SFU to point it to a external smtp server.



eperea -> RE: Problems with new install, mailx (Sep. 27, '06, 1:16:47 PM)

Look in /etc/mail/sendmail.cf for

# "Smart" relay host (may be null)
DS

and add the server's FQDN right after the DS. e.g.:

DShermes.walkereng.com

(I'm a qmail user, so definitely subject to correction on anything to do with sendmail.)



Rodney -> RE: Problems with new install, mailx (Sep. 27, '06, 1:17:53 PM)

I think what eperea is saying is that there is a firewall filtering out
port 25 (SMTP) and spoofing a connection. So there's no problem with sendmail
from a technical viewpoint. From within your local network you may have an SMTP
hub (relay host). You need to find out which machine that is and then adjust
the configuration file to run your e-mail throught it. Your network isn't allowing
you direct SMTP connections to the outside world.



eperea -> RE: Problems with new install, mailx (Sep. 27, '06, 1:23:19 PM)

Yes, I also think that's what he was trying to say. :-)



strtcar -> RE: Problems with new install, mailx (Sep. 27, '06, 2:34:59 PM)

Thanks for your help all. We solved the problem. The internet filter at the client only alows output emails from certain servers. They added this server to the list and I am able to send outbound emails.

Richard



Page: [1]



Forum Software © ASPPlayground.NET Advanced Edition 2.5 ANSI

0.063